ETL Listed Cat6 Plenum Ethernet Cable — 1000 ft EZ Pull Box
Pure copper, plenum legal, and independently tested. That is the short version. The longer version is 23AWG solid bare copper conductors certified to 550MHz, which is enough headroom to run Gigabit today and 10-Gigabit when the switches get replaced. Cameras, access points, phones, and PoE loads all sit comfortably inside its rating.
Specifications
- Cable type: Cat6 plenum UTP Ethernet cable
- Listing: ETL Listed
- Rating: CMP plenum rated for air-handling spaces
- Conductors: 23AWG, 100% solid bare copper
- Configuration: 4 unshielded twisted pairs (UTP)
- Bandwidth: up to 550MHz
- Performance: Gigabit Ethernet, 10-Gigabit Ethernet, and PoE applications
- Jacket: low-smoke PVC, CMP plenum rated
- Signal performance: reduced NEXT and FEXT, low attenuation
- Compliance: ANSI/TIA-568.2-D and NEC CMP requirements
- Certification: ETL certified for performance and safety
- Compatibility: RJ45 connectors, patch panels, and standard network hardware
- Packaging: 1000ft EZ pull box
- Applications: commercial and residential structured cabling, data centers, VoIP, IP cameras, PoE devices, smart home networks, high-speed Ethernet systems
Copper is the whole argument
Copper-clad aluminum is cheaper for a reason. It carries less current, heats up faster under PoE, and snaps at the punchdown when you look at it wrong. Every conductor in this box is bare copper end to end, which is why voltage drop stays predictable on a 90-meter run and why terminations hold after the ceiling tiles go back up.
Twist geometry does the quiet work
Four pairs, each with its own twist rate, spaced so they interfere with each other as little as physics allows. That is what keeps NEXT and FEXT down when this cable is bundled with thirty others in a tray. The jacket stays flexible enough to pull through conduit and around corners without kinking, and it strips clean.
Rated to 550MHz
Bandwidth is margin. At 550MHz there is room above what Gigabit needs, room for 10-Gigabit at standard channel lengths, and room for PoE++ devices drawing real power without the pairs cooking. Networks get busier every year; this cable is specified for the version of the building that exists five years from now.
Why the CMP jacket matters
Anywhere air moves — above a drop ceiling, under a raised floor, inside a return plenum — code says the cable in that space cannot feed a fire or fill the building with smoke. CMP is the rating that satisfies that requirement. Low-smoke, flame-resistant PVC, built to NEC rules for air-handling spaces. Hospitals, schools, and commercial fit-outs all land here, and inspectors check.
What ETL Listed actually means
Intertek tested it. Not the factory, not the seller. The cable was submitted against published Cat6 performance requirements and passed, and it is manufactured to hold that standard from box to box. When you are pulling forty runs off a pallet, consistency between boxes is the specification that matters most.
Common installs
- Gigabit Ethernet networks
- 10-Gigabit Ethernet applications
- Power over Ethernet (PoE, PoE+, PoE++)
- VoIP phone systems
- IP security cameras
- Wireless access points
- Data centers and server rooms
- Commercial office networks
- Smart home systems
- Residential structured cabling
The case for this part number
Three things have to be true for a plenum Cat6 run to be worth doing once: real copper, a jacket that passes inspection, and performance somebody else verified. This cable is all three, packed in an EZ pull box that feeds without tangling and empties without a second person holding the reel.
Tested against ANSI/TIA-568.2-D. Standards documentation is published by the Telecommunications Industry Association, and listing details are available through Intertek ETL.
Pair it with our Cat6 Cables and Cat6A Cables to finish the run. IPCables ships tested, pure-copper cable from Arizona.